Electrical Cabin and Substation Environmental Monitoring

Tecsystem's NT311 system monitors the environment inside an electrical cabin or substation panel — not just the machines within it — tracking temperature, humidity, dust deposit and door access from a single DIN-rail control unit paired with the TPU sensor.

Talk to our technical team Download the full datasheet library

Why cabin environmental monitoring matters

A transformer or switchgear protection unit tells you about the machine; it says nothing about the environment the machine sits in. Dust deposit inside a cabin degrades insulation and cooling airflow over time; humidity swings drive condensation risk; a cabin running hotter than intended stresses every device inside it, not just the one being monitored. Cabin-level monitoring catches these conditions early — before they show up as a fault on the equipment itself — and adds a door-open alarm for basic access monitoring.

NT311 & TPU: the cabin monitoring system

A single sensor (TPU) feeds temperature, humidity and dust readings to the NT311 control unit, which manages alarms, fan and heater control, and door monitoring — available in three configurations depending on the connectivity needed.

NT311 ETH + TPU — the complete networked system

The full system: TPU sensor plus NT311 ETH control unit, with Ethernet Modbus TCP output for remote monitoring and programming. Patent-pending environmental monitoring purpose-built for electrical cabins and the machines inside them — useful for planning and managing maintenance interventions before a problem develops.

  • Monitors: temperature (-40°C to +70°C), dust deposit index (6–30 dSt), humidity (10–90% RH), 2 door contact inputs
  • Outputs: ALARM, FAULT, FAN, HEATER relays (10A) + Ethernet Modbus TCP
  • Power supply: 85–260 Vac 50/60 Hz
  • Mounting: DIN rail, compact form factor

NT311 — base and D (RS485) versions

The same monitoring logic without Ethernet: NT311 basic is relay-only, while NT311 D adds an RS485 Modbus digital output for integration into a plant monitoring system without a full Ethernet connection.

TPU — environmental sensor

The sensor behind the whole system: internal temperature, relative humidity and three internal dust-deposit sensors, connected to the NT311 control unit via a digital BUS link.

  • Temperature: -40°C to +70°C (±1% +/-1°C)
  • Humidity: 0–90% RH (±5%)
  • Dust deposit: 6–30 dSt (±2 dSt), 3 internal sensors
  • Dimensions: 110 x 50.1 x 35 mm

Part of a complete substation monitoring system

Tecsystem positions the TPU cabin sensor alongside two other systems as a combined substation monitoring solution: the TRBH smart ventilation system (transformer and cabin temperature, reducing losses and improving energy efficiency) and the FO Digital System in optical fibre (monitoring the transformer's low-voltage joints to help avoid service interruptions). Combined, remote control of the full substation becomes possible from a single monitoring setup.

Explore the TRBH ventilation system Explore the FO Digital System

Choosing the right configuration

Need Recommended configuration
Local monitoring only, relay outputs NT311 (basic)
Integration via RS485 Modbus NT311 D
Remote monitoring and programming via Ethernet NT311 ETH + TPU
Full substation monitoring (cabin + transformer + ventilation) NT311 ETH + TPU + TRBH + FO Digital System

Built for demanding electrical environments

The NT311 control unit is tested against CE electromagnetic interference standards (CEI-EN61000-4-4), rated -20°C to +60°C, with a self-extinguishing Blend PC/ABS housing and IP20 protection; a tropicalized coating option is available. The TPU sensor itself is rated for a wider -40°C to +70°C range, reflecting its position inside the cabin rather than in a control panel.

Frequently asked questions

What's the difference between monitoring the cabin and monitoring the transformer inside it?

Transformer temperature control units (like the T154 or NT935 range) protect the machine itself. The NT311 + TPU system monitors the space around it — ambient temperature, humidity, dust and door access — catching environmental conditions that stress equipment before they show up as a fault on any individual machine.

Can the NT311 control fan and heater systems directly?

Yes — the NT311 ETH includes dedicated FAN and HEATER relay outputs, so the unit can actively manage cabin climate conditions rather than only reporting them.

Does the door contact input work as an access control system?

Not as a full access control system — it's 2 clean contact inputs (NC) for door-open alarm signalling, useful for basic monitoring of who's opened the cabin, not a replacement for a dedicated access control solution.

How is the TPU sensor connected to the NT311 unit?

Via a power link cable carrying both power and digital communication — a single connection rather than separate wiring for each measured parameter.

Not sure which configuration fits your installation?

Our technical team can help you match the right NT311 configuration to your cabin monitoring and connectivity needs.

Contact our technical team Browse the full product catalogue